CONVENTIONAL SLOTTED DOMED RUPTURE DISK (LF TYPE)
Conventional Slotted Domed Rupture Disk consists of a slotted metal top section and a seal membrane. Burst pressure is controlled by the slotted and perforated top section. When excessive pressure occurs on the protected system, the disk bursts along the pre-slotted lines to provide a full relief opening.
Types
Round Conventional Slotted Domed Rupture Disk (LF)
Rectangular Conventional Slotted Domed Rupture Disk (LFF)
Features
◆ Designed for gas, liquid, dust service.
◆ Maximum operating pressure up to 80% of the minimum burst pressure.
◆ Few fragments on burst.
◆ Withstand vacuum and backpressure with vacuum support.
◆ Complex structure.
◆ Suitable for low burst pressure conditions.
◆ Poor fatigue resistance in pressure cycling conditions.
Specifications
TYPE |
LF |
BURST DIRECTION |
|
LOAD TYPE |
TENSION |
SIZE (mm) |
25~900 |
BURST PRESSURE RANGES (MPa) |
0.005~20.0 |
BACKPRESSURE (VACUUM) SUPPORT |
AVAILABLE |
DISK HOLDER TYPE |
LJA |
DYNAMIC RESPOND (sec) |
＞1/1000 |
INFLAMMBLE MEDIA USAGE |
SUITABLE |
CYCLE LIFE |
＞500 |
SPARK POSSIBILITY |
NO |
RELIEF VALVE ISOLATION |
AVAILABLE |
NOTICE |
SUITABLE FOR LOW PRESSURE CONDITION |
http://www.dutashop.com/